Civil War Relicman,
Harry Ridgeway

Winchester, Virginia USA, changed hands 70 times in the Civil War!
authentic Civil War relics, bought and sold

Civil War artillery, Relicman sales catalog.
All items listed are authentic to the Civil War or as otherwise described.
All artillery items listed have been disarmed.
Any excavated relics have been recovered from private property with owners permission.

A0353...Rifled artillery projectile, Tennessee design, Confederate manufacture, bursting shell, pattern with, bourreleted ringed short nose, copper disc sabot with 3 studs in the shell flush mounted with short bolt, wood time fuze, Confederate rifle, 3in. Projectile was Confederate manufactured and was originally believed to have been developed by Mullane working with Read and others, however, updated research has not been able to confirm the existence of a man named Mullane. Period literature often refers to work as the "Tennessee" design, cup, or sabot, and is attributed to Captain Lardner Gibbon, although official recognition for his development was never granted. The sabot system utilized was a copper disc held in place by studs and secured with a center bolt, a manufacturing innovation allowing the parts made of different metals, copper and iron, to be prepared independent and assembled at the end. This sabot pattern, referred to as Type I, employed three long studs cast into the shell body fitted through the disc sabot, a short bolt apparently secured the copper disc flush mounted and eliminated the wood dowel used in earlier versions. Performance of this sabot was unsatisfactory, typically the studs or the bolt would break on firing releasing or distorting the copper disc sabot. This pattern utilized two bourrelet rings, as a labor saving device, only the rings had to be accurately machined, the rest could be left rough , the casting is crude, and the width and depth of the rings also vary by the depth of the milling. Length of nose varies considerably and is partly the result of how much the nose was milled to accommodate the wood fuze . The nose on this pattern is relatively short and the bourrelet rings are typically strong. Fuze employed was a wood time fuze, fuze hole is smooth and tapered, the simple to make fuze could easily be hammered into place, Jones Fuzes pg. 2.
Reference: Dickey & George, Field Artillery (1993 Edition), pg. 203.

Projectile measures: diameter 2. 94in., length 8in. overall (6.5in. exclude bolt & studs), weight 6.8lbs. Sabot is fired showing weak lands and grooves, and is intact. Wood fuze is partial. Projectile is disarmed: drill hole through paper section of time fuze. Recovered: Virginia campaign.
For sale............Sale pending..
Details click: